Yongnuo Speedlites Home Page
Yongnuo Speedlite YN600EX-RT II Review
Almost identical to the Canon 600EX II-RT Speedlite and one of Yongnuo’s most popular speedlites. Canon RT 2.4 GHz wireless radio communication (master and slave), Canon E-TTL II, Guide number of 60m at ISO 100 and 200mm, zoom range 20-200mm, compatible with Canon ST-E3 transmitter.
Yongnuo Speedlite YN968EX-RT Review
Similar to the YN600EX-RT II but with 20-105mm zoom head, slightly more powerful, and built-in LED light. Canon RT 2.4 GHz wireless radio communication (master and slave), Canon E-TTL II, Guide number of 60m at ISO 100 and 105mm, zoom range 20-105mm, compatible with Canon ST-E3 transmitter.
Yongnuo Speedlite YN568EX III Review
Similar to the Canon 580EX II Speedlite. Optical wireless (master & slave), Canon E-TTL II, Guide number of 58m at ISO 100 and 105mm, zoom range 24-105mm, compatible with ST-E2 infrared transmitter.
Yongnuo Speedlite YN685 Review
Compatible with Canon cameras but uses Yongnuo’s proprietary 622C radio wireless system (slave only). Full Canon ETTL. Built-in radio receiver triggered by YN-622 transmitter. Guide number of 60m at ISO 100 and 200mm, zoom range 20-200mm.
Yongnuo Speedlite YN560 IV Review
Manual flash output with no ETTL. Built-in radio transceiver uses the RF-603 radio system triggered by YN560-TX(II) transmitter (master and slave).
Yongnuo Speedlite YN560 III Review
The same as the YN560 IV above but can only act as a slave.
Triggers (Transmitters & Receivers)
Yongnuo Speedlite Transmitter YN-E3-RT II Review
Almost identical to the Canon ST-E3-RT Transmitter and updated version of the Yongnuo YN-E3-RT. Now works with more recently Canon cameras. Uses Canon RT radio wireless system. Supports E-TTL II, HSS.
Yongnuo Speedlite Transmitter YN-E3-RT Review
Almost identical to the Canon ST-E3-RT Transmitter. Uses Canon RT radio wireless system. Supports E-TTL II, HSS. Has a few compatibility issues with newer Canon cameras.
Yongnuo Speedlite Transmitter ST-E2 Review
Almost identical to the Canon ST-E2 but with improved range and takes AA batteries. Wireless communication is by infra-red pulses requiring line-of-sight with the slave speedlite. Designed to work with the Canon optical EX wireless system.
Yongnuo YN-622C-TX Controller Review
E-TTL radio controller using Yongnuo’s 622C radio system. Can be used to control the YN685 speedlite or a YN-622C radio receiver, which in turn can be attached to a Canon 580EX or 430EX to add full radio wireless communication.
Yongnuo YN-622C II Trigger Kit Review
The trigger kit consists of 2x YN-622C II radio wireless transceivers. Each unit can act as a transmitter or a receiver that support E-TTL II using the Yongnuo 2.4GHz 622C radio system. Each unit can also be controlled by the YN-622C-TX controller.
Yongnuo YNE3-RX Receiver
E-TTL II radio receiver that uses the Canon 2.4GHz RT radio system. This unit allows older Canon EX Speedlites such as the 580EX II (that use optical wireless) to be added to a Canon radio system and to be controlled using a ST-E3-RT controller or any RT speedlite master.
Yongnuo RF-603C II Kit (manual transceivers)
A pair of RF 603 II transceivers which can be used as either a transmitter or receiver. These are simple manual transceivers and cannot communicate E-TTL information or change power settings. They use the Yongnuo RF 603C radio system.
Yongnuo YN560 TX II Transmitter Review
Updated version of the popular manual transmitter for the YN560 III & YN560 IV Speedlites. Compact body, better LCD layout and locking hotshoe clamp. Uses the RF603C radio system so can also be used to trigger the RF-603C transceiver mentioned above
Yongnuo YN560 TX Transmitter Review
Transmitter for the YN560 III & YN560 IV Speedlites. Uses the RF603C radio system so can also be used to trigger the RF-603C transceiver mentioned above